1 technical data sheet 75 ohm bnc male right angle connector crimp/solder attachment for rg179, rg187 confguration connector bnc male connector interface type rg179,rg187 cable attachment method (shield/contact) crimp/solder body style right angle electrical specifcations frequency range, mhz dc to 1,000 impedance, ohms 75 maximum operating voltage, volts 500 dielectric withstanding voltage, vrms 1,000 mechanical specifcations temperature operating range, deg c -65 to +165 size length, in [mm] 1.064 [27.03] width/dia., in [mm] 0.57 [14.48] height, in [mm] 1.748 [44.4] . weight, lbs [g] 0.061 [27.67] connector type bnc male contact material and plating brass, gold contact plating specifcation 30 in. minimum coupling nut material and plating brass, nickel coupling nut plating specifcation 100 in. minimum body material and plating brass, nickel body plating specifcation 100 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm bnc male right angle connector crimp/solder attachment for rg179, rg187 PE4610 PE4610 PE4610 rev 75 ohm bnc male right angle connector crimp/ solder attachment for rg179, rg187
2 technical data sheet plotted and other data notes: v alues at 25 c, sea level 75 ohm bnc male right angle connector crimp/solder attachment for rg179, rg187 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% avail - ability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm bnc male right angle connector crimp/solder attachment for rg179, rg187 PE4610 url: http://www.pasternack.com/bnc-male-standard-rg179-rg187-connector-PE4610-p.aspx 75 ohm bnc male right angle connector crimp/ solder attachment for rg179, rg187 PE4610 PE4610 rev
? 2013 pasternack enterprises all rights reserved 3 PE4610 rev dwg title PE4610 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown & slide ferrule (1) onto cable. 2. flare end of cable braid & slide metal spacer (2) & ptfe (3) spacer over cable dielectric 3. the contact (4) should butt . against the dielectric & ptfe spacer. crimp contact to cable center conductor 4. install cable assembly into body so that the inner ferrule portion of body slides under braid. push cable assembly forward until contact snaps into place. slide ferrule over braid and up against connector body & crimp. assembly procedures contact: .068" hex crimp tool ferrule: .178" hex crimp tool crimp size required fscm no. 53919 cad file 052402 scale n/a size a xxxx 75 ohm bnc male right angle connector crimp/solder attachment for rg179, rg187 PE4610 cad drawing
|
